Roadworks

Roadworks

Simex offers a broad spectrum of solutions for roadworks, including the innovative self-leveling PL planers, the PLB and PHD planers for excavators and the ST asphalt floats.
 

PL SG

Intended for mounting on front loaders and skid steer loaders. Designed to remove layers of asphalt or cement under the guard rail.  Adjustable milling depth.
Available in version with conveyor belt for removing material from trench. Interchangeable milling drums in different widths available on request.


 
PL SG
PL SG
PL SG
PL SG
PL SG
PL SG
Standard drum width 350 mm 14 inch
Depth 0-150 mm 0-6 inch
Required oil flow 75-140 l/min 18-38 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

TF 200

TF 200
TF 200
TF 200
TF 200
TF 200
TF 200
TF 200
TF 200
Recommended excavator weight 2,5-7 ton 5500-15500 lbs
Weight without bracket (1) 300 kg 660 lbs
Drum width (HP) 565 mm 22 inch
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PLB 200

Single-depth planers for excavators
PLB 200
PLB 200
Recommended excavator weight (1) 2-4 ton 4400-8800 lbs
Width 200 mm 8 inch
Depth 0-70 mm 0-3 inch
Operating weight 185 kg 407 lbs
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 25.10 - 10 inch

Designed to mill pre-set sections on hard and compact surfaces
 
PL 25.10 - 10 inch
PL 25.10 - 10 inch
Width 250 mm 10 inch
Depth 0-70 mm 0-2,7 inch
Required oil flow 30-60 l/min 8-16 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 60.25

PL 60.25
PL 60.25
Width 600 mm 24 inch
Depth 0-250 mm 0-10 inch
Required oil flow 110-170 l/min 29-45 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

RS

RS
RS
RS
RS
RS
RS
RS
RS
RS
RS
Rumble strip width (1) 300-350-400mm 12-14-16 inch
Rumble strip depth (1) 0-25 mm 0-1 inch
Required oil flow 75-140 l/min 20-37 gpm
(1)Standard dimensions – custom dimensions on request.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PLC 18

Designed to mill pre-set sections on hard and compact surfaces
 
PLC 18
PLC 18
Standard drum width 450 mm 18 inch
Max. depth 150 mm 6 inch
Required oil flow 85-120 l/min 22-32 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL RAIL

Studied for creating one or two small trenches at sides of rail tracks to be filled later with sound-insulating material.
Fitted with two guide wheels positioned at front and rear of milling disks that run on the rail to guarantee maximum precision.
Wheels available in different forms and sections for different rail profiles.

Interchangeable milling disks in different widths available on request.
PL RAIL
PL RAIL
Disk width 30-40-50-60 mm 1,2-1,6-2-2,4 inch
Depth 0-70 mm 0-2,75 inch
Required oil flow  75-115 l/min 20-30 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

TF 400

TF 400
TF 400
TF 400
TF 400
TF 400
TF 400
TF 400
TF 400
TF 400
TF 400
Recommended excavator weight 6-12 ton 13000-26500 lbs
Weight without bracket (1) 470 kg 1050 lbs
Drum width (HP) 625 mm 25 inch
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PLB 300

Single-depth planers for excavators
 
PLB 300
PLB 300
PLB 300
PLB 300
PLB 300
PLB 300
PLB 300
PLB 300
Recommended excavator weight (1) 3-7 ton 6600-15400 lbs
Width 300 mm 12 inch
Depth 0-100 mm 0-4 inch
Operating weight 390 kg 860 lbs
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 35.15 - 14 inch

Designed to mill pre-set sections on hard and compact surfaces
 
PL 35.15 - 14 inch
PL 35.15 - 14 inch
Width 350 mm 14 inch
Depth 0-110 mm 0-4,3 inch
Required oil flow 45-80 l/min 12-21 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 100.25

PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
PL 100.25
Width 1000 mm 40 inch
Depth 0-220 mm 0-8,5 inch
Required oil flow 120-190 l/min 32-50 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PLC 24

Designed to mill pre-set sections on hard and compact surfaces
 
PLC 24
PLC 24
PLC 24
PLC 24
PLC 24
PLC 24
PLC 24
PLC 24
Standard drum width 600 mm 24 inch
Max. depth 170 mm 7 inch
Required oil flow 100-150 l/min 27-40 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

TF 650

TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
TF 650
Recommended excavator weight (1) 9-16 ton 19800-35200 lbs
Weight without bracket 650 kg 1430 lbs
Drum width (HP) 700 mm 28 inch
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PLB 350

Double-depth planers for excavators
 
PLB 350
PLB 350
PLB 350
PLB 350
PLB 350
PLB 350
PLB 350
PLB 350
Recommended excavator weight (1) 6-9 ton 13000-20000 lbs
Width 350 mm 14 inch
Depth 0-120 mm 0-5 inch
Operating weight 530 kg 1160 lbs
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 40.15 - 16 inch

Designed to mill pre-set sections on hard and compact surfaces
 
PL 40.15 - 16 inch
PL 40.15 - 16 inch
Width 400 mm 16 inch
Depth 0-150 mm 0-5,9 inch
Required oil flow 65-115 l/min 17-30 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

ST 200

Fitted with side shift and side plates for conveying material that are hydraulically adjustable with open-close mechanical device. They can lay asphalt on sidewalks or widen the roadway without the prime mover passing over the spread material since they can work totally offset the machine.
 
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
ST 200
Operating weight (1) 675 kg 1485 lbs
Required oil flow 45 l/min 12 gpm
Oil pressure 200 BAR 2900 psi
(1) User is responsible for ensuring that the characteristics of the prime mover suit the weight and specifications of the attachment

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PLC 30

Designed to mill pre-set sections on hard and compact surfaces
 
Standard drum width 750 mm 30 inch
Max. depth 170 mm 7 inch
Required oil flow 110-170 l/min 29-45 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

TF 850

TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
TF 850
Recommended excavator weight (1) 14-22 ton 30800-48500 lbs
Weight without bracket 1100 kg 2420 lbs
Drum width (HP) 800 mm 32 inch
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PLB 400

Single-depth planers for excavators
 
Recommended excavator weight (1) 6-9 ton 13000-20000 lbs
Width 400 mm 16 inch
Depth 0-120 mm 0-5 inch
Operating weight 515 kg 1130 lbs
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 40.35 - 16 inch

Designed to mill pre-set sections on hard and compact surfaces, able to go down deeper.
 
PL 40.35 - 16 inch
PL 40.35 - 16 inch
Width 400 mm 16 inch
Depth 100-350 mm 4-13,7 inch
Required oil flow 110-170 l/min 29-45 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PLC 40

Ideal for milling jobs
 
PLC 40
PLC 40
PLC 40
PLC 40
Standard drum width 1000 mm 40 inch
Max. depth 130 mm 5 inch
Required oil flow 110-190 l/min 29-50 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

TF 1100

TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
TF 1100
Recommended excavator weight 20-34 ton 44000-80000 lbs
Weight without bracket (1) 1340 kg 2950 lbs
Drum width (HP) 850 mm 34 inch
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PLB 450

Single-depth planers for excavators
PLB 450
PLB 450
PLB 450
PLB 450
PLB 450
PLB 450
PLB 450
PLB 450
PLB 450
PLB 450
Recommended excavator weight (1) 8-13 ton 17600-29000 lbs
Width 450 mm 18 inch
Depth 0-150 mm 0-6 inch
Operating weight 710 kg 1560 lbs
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 45.20 - 18 inch

Designed to mill pre-set sections on hard and compact surfaces
 
PL 45.20 - 18 inch
PL 45.20 - 18 inch
PL 45.20 - 18 inch
PL 45.20 - 18 inch
PL 45.20 - 18 inch
PL 45.20 - 18 inch
PL 45.20 - 18 inch
PL 45.20 - 18 inch
PL 45.20 - 18 inch
PL 45.20 - 18 inch
Width 450 mm 18 inch
Depth 0-150 mm 0-5,9 inch
Required oil flow 75-115 l/min 20-30 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

TF 2100

TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
TF 2100
Recommended excavator weight 28-45 ton 61700-99000 lbs
Weight without bracket (1) 2380 kg 5240 lbs
Drum width (HP) 950 mm 38 inch
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PHD 450

Double-depth planers for excavators
 
PHD 450
PHD 450
PHD 450
PHD 450
PHD 450
PHD 450
PHD 450
PHD 450
PHD 450
PHD 450
PHD 450
PHD 450
Recommended excavator weight (1) 10-16 ton 22000-35000 lbs
Width 450 mm 18 inch
Depth 0-180 mm 0-7 inch
Operating weight 900 kg 1980 lbs
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 45.20HP - 18 inch

Designed to mill pre-set sections on hard and compact surfaces
 
PL 45.20HP - 18 inch
PL 45.20HP - 18 inch
PL 45.20HP - 18 inch
PL 45.20HP - 18 inch
PL 45.20HP - 18 inch
PL 45.20HP - 18 inch
Width 450 mm 18 inch
Depth 0-170 mm 0-6,7 inch
Required oil flow 100-150 l/min 27-40 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

TF 2500

TF 2500
TF 2500
Recommended excavator weight 40-55 ton 88000-121000 lbs
Weight without bracket(1) 2700 kg 5950 lbs
Drum width (HP) 1000 mm 40 inch
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 50.20 - 20 inch

Designed to mill pre-set sections on hard and compact surfaces
 
PL 50.20 - 20 inch
PL 50.20 - 20 inch
PL 50.20 - 20 inch
PL 50.20 - 20 inch
Width 500 mm 20 inch
Depth 0-170 mm 0-6,7 inch
Required oil flow 100-150 l/min 27-40 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

TF 3100

TF 3100
TF 3100
TF 3100
TF 3100
TF 3100
TF 3100
TF 3100
TF 3100
Recommended excavator weight 50-70 ton 110000-154000 lbs
Weight without bracket (1) 2940 kg 6470 lbs
Drum width (HP) 1250 mm 50 inch
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PHD 600

Single-depth planers for excavators
 
PHD 600
PHD 600
PHD 600
PHD 600
PHD 600
PHD 600
PHD 600
PHD 600
Recommended excavator weight (1) 16-24 ton 35000-53000 lbs
Width 600 mm 24 inch
Depth 0-200 mm 0-8 inch
Operating weight 1150 kg 2530 lbs
(1) User is responsible for ensuring that the equipment meets the excavator’s specifications and weight requirements.

Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 60.20 - 24 inch

Designed to mill pre-set sections on hard and compact surfaces
 
 
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
PL 60.20 - 24 inch
Width 600 mm 24 inch
Depth 0-170 mm 0-6,7 inch
Required oil flow 100-150 l/min 27-40 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 60.20HP - 24 inch

Designed to mill pre-set sections on hard and compact surfaces
 
Width 600 mm 24 inch
Depth 0-170 mm 0-6,7 inch
Required oil flow 110-170 l/min 29-45 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 75.20 - 30 inch

Designed to mill pre-set sections on hard and compact surfaces
 
 
PL 75.20 - 30 inch
PL 75.20 - 30 inch
Width 750 mm 30 inch
Depth 0-170 mm 0-6,7 inch
Required oil flow 110-170 l/min 29-45 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 1000 - 40 inch

Ideal for milling jobs
 
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
PL 1000 - 40 inch
Width 1000 mm 40 inch
Depth 0-130 mm 0-5 inch
Required oil flow 110-190 l/min 29-50 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close

PL 1500 - 60 inch

Ideal for milling jobs, 60 inches
 
PL 1500 - 60 inch
PL 1500 - 60 inch
PL 1500 - 60 inch
PL 1500 - 60 inch
PL 1500 - 60 inch
PL 1500 - 60 inch
Width 1500 mm 60 inch
Depth 0-130 mm 0-5 inch
Required oil flow 130-200 l/min 34-53 gpm
Simex does not accept responsibility or liability for the information provided. Technical modifications may vary without prior notice.
These are the standard features, for custom solutions contact us.
Close
For more information on our attachments, feel free to contact us. We’ll be pleased to respond to any of your requests.
Contact us now

Related news about Roadworks

ART 1000: dozens of construction sites throughout Italy
Re-stART: dozens of construction sites with ART 1000 throughout Italy. Goal? Make the innovative technology widely known to Local Authorities, riding the concept of on-site regeneration of damaged bituminous conglomerate with all the related benefits, including economic savings, the remodulation of construction site operations and low environmental impact.
News
Simex products for road maintenance
Since 1991 alongside companies and professionals in road maintenance and earthmoving sector.
News
Road milling with the PL 2000 asphalt cold planer
Road milling in Florence with a PL 2000 road planer: 200 cm of pure (re)paving power. 
Videos
The widest asphalt cold planer for skid steer loaders: the PL 2000 in Florence
PL 2000 in Florence: the experience of the Bitumvie srl company with the widest cold asphalt planer for skid steer on the market.
 
News
Scarification of the surface course with a PL 1000 cold asphalt planer
PL 1000 cold planer in Bassano del Grappa, Italy: scarification and asphalt restoration after optical fiber installation.
News
Simex ART 1000: the market launch
The technology for the recovery of distressed road pavements, that reuses 100% of the existing material, was unveiled in its final version at Bauma Munich 2022. Now it is ready for the market launch.
News
PL 2000 cold planer for skid steer loader
We are in Spoltore, near Pescara (Italy), where the company Asfalti Zaccardi Group, paving specialist, is using the PL 2000, cold road planer with a 2-meter wide milling drum. 
Videos
Efficient road maintenance with Simex

Simex offers a wide range of attachments for compact loaders and excavator booms, providing long-lasting solutions for road maintenance. PL 2000, the widest cold planer for skid steer loaders, and ART, the asphalt repair technology, are the last innovations that Simex will show at Bauma 2022 for the road sector. 

Article released on World Highways, October 1, 2022.

News
Simex ART®: recycled and regenerated asphalt in Italy
Asphalt regeneration of a section of the cycle path Viale dei Cappuccini, Imola (Italy) with Simex ART 1000, the patented asphalt repair technology.
News
PV 600 vibrating plate compactor
Simex PV range features 5 models (PV 300-450-600-700-850) for excavators from 1,5 to 40 tons.
Videos
Simex ART®1000 in action
Simex patented technology, specifically designed for the regeneration of blacktop, which reuses 100% of the material present on site without removing the milled material or adding new HMA (hot mix asphalt).
Videos
Simex ART® - The Asphalt Repair Technology
Previewed at Asphaltica 2021 and available on the Italian market in the second half of 2022, Simex ART is the technology for the recovery of distressed pavements, that reuses 100% of the existing material.
 
News
Milling under guardrail with a PL SG
Simex counts among its products a special road planer, called PL SG, designed to mill either under the guardrail or when leaned against it.
News
ASPHALTICA: 24-26 November, 2021
Simex will be at Asphaltica 2021, that will be held from Wednesday 24 to Friday 26 November at Verona Fiere, Italy. Meet us at Hall 11, Stand F3.
 
Events
Asphalt removal with a PHD 450 planer for excavator
Simex PLB and PHD planers for excavators are able to remove the entire layer of asphalt or cement in preparation for trenching, or are used to mill deteriorated sections for later resurfacing.
Videos
Crushing limestone with a CBE 30
In the nearby of Vologda (north-western Russia), a Simex crusher bucket CBE 30 was used for the volumetric reduction of big size limestone to be reused as aggregate for road bases.
Videos
RS 16 planer for rumble strips
Simex planer for rumble strips is specifically designed for milling lines into the road pavement to produce noise and vibration as a safety measure.
Videos
Road maintenance in China: milling and paving
Simex PL 45.20 road planer and ST 200 asphalt float on a jobsite in China. Road maintenance and paving operations.
Videos
Road maintenance: PL 45.20 and ST 200 in China
On April 2020, Simex sold a road planer PL 45.20 in China to Shunying Traffic Engineering Co., through our local dealer ATE (Shanghai). The planer has been added to a ST 200 asphalt float, already part of the fleet.
News
New Simex PL 60: road planers for milling asphalt

New PL 60, wider work surface to satisfy the market's requests.

Videos
The new Simex PL 60: Conexpo 2020 interview

An exclusive interview during Conexpo 2020 about our new Simex PL 60 asphalt planer for skid steer loaders and about all the new equipment we're launching.

Videos
Simex TA 300 wheel saw: a little champion of productivity
The Simex TA 300 wheel saw can excavate mini-trenches with depths from 200-300 mm, and thanks to the conveyor and scraper it leaves the trench clear and clean
News
A special T 200 for fiber optics
In Milan a T 200 wheel saw fitted with suction system used by Sirti to create the fiber optic network is helping to bring down costs down and reduce completion times. 
News

Request information

Fields marked with (*) are mandatory.
Sort by: Name Date Size
asso_aemasso_araasso_ara_aedasso_assodimiasso_confindustriaasso_sitebasso_unaceaasso_uniiatt